Thermal Conductive Silicone Adhesive Glue 45g
Price
৳170
/Pcs
Share
Top Selling Products
Specifications:
- Density (g/cm3): 2.3 ~ 3.0
- Surface drying time (25 , min):≤10
- Tensile strength (MPa): ≥2.5
- Elongation at break(%): ≥100
- Shear strength (MPa): ≥1.5
- Hardness (shore A): 50 ~ 65
- Operating temperature range: -60~280℃
- Dielectric strength (kV / mm): ≥18
- Volume resistivity (Ω.cm) 1 × 10 (15 th)
- Thermal conductivity (w / (m.k)): 1.6
Instructions:
- 1. Will be sticky or coated finishing clean, remove rust, dust and oil and so on.
- 2. Unscrew the hose cap, the glue to the clean surface, so that distribution will be sticky surface close fixed.
- 3. Will be glued or sealed parts in the air, let it cure. Curing process is a cure from the surface to the internal process within 24 hours (room temperature and 55% relative humidity) glue curing depth of 2-4mm, and if the position is deep, especially in the air is not easily accessible to the site, full curing time will be extended, if the temperature is low, the curing time will be extended. Prior to further processing or packaging components to be bonded, it is recommended to wait long enough to make the bonding firm and integrity are not affected.
Package Included:
- 1 x Kafuter K-5204K 45g Bonding Adhesive
Frequently Bought Products
Top Selling Products
